Epson SC-T5160

Settings item Settings value Explanation
USB
Auto
*
Normally, leave the setting as Auto. If HP-GL/2 or HP RTL print data
is sent from a CAD application or plotter, this is automatically
determined, and switched to HP-GL/2 mode.
If HP-GL/2 mode printing is not carried out normally, or if normally
printing in HP-GL/2 or HP RTL, set as HP-GL/2.
HP-GL/2
Network
Auto
*
HP-GL/2
SC-T3100M Series/SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series/SC-T2100 Series User's Guide
Using the Menu
142