B
Display the Basic Settings screen for the printer
driver, and then select Auto Sheet Feeder as
the Source.
U “Basic Operating Procedures (Windows)”
on page 48
C
Display the Layout tab of the printer driver,
and then select 2-sided printing.
Note:
❏ Click Binding Settings to set the Binding
Edge and Binding Margin. Depending on
the software you are using, the width of the
margin you set and the actual print results
may differ, we therefore recommended that
you perform a test print first.
❏ Select Folded Booklet to print as a booklet.
In the following example, when the paper is
folded in two, the inner pages (pages 2, 3, 6,
7, 10, and 11) are printed first.
D
Check other settings, and then start printing.
E
When you have finished printing the odd pages
and the instructions screen is displayed, follow
the on-screen instructions to re-load the paper,
and then click Resume.
SC-T3100M Series/SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series/SC-T2100 Series User's Guide
Printing with the Printer Driver from Your Computer
83
To Next Page
Loading...
Need help?
General