The setting items vary according to the paper.
If you select a paper type or size that does not match the loaded paper,
the printout will have creases, ink smudges, or banding.
Press OK after you complete the settings
When Ready is displayed, you
can start printing.
You can load roll paper and then load cut
sheets on the auto sheet feeder. The printer
driver allows you to select either of these two
paper sources.
Paper Type Paper Remaining
or Paper Size
Selecting the paper type
Select between two types of paper depending on what you want to
print.
• General Purpose/Textile: Select when printing to fabric.
• General Purpose/Rigid: Select when printing on hard material
such as cups, key rings, coasters, and so on.
Promptly select the settings because the paper will start being fed
if the screen is not used for 90 seconds.
Set the Paper Type and Paper Size Print
5
To Next Page
Loading...
Need help?
General