18. The installation program begins copying the files to your
hard disk and shows the progress of the installation as it
proceeds. After the status bar disappears, the driver
continues installing for a minute or so. Wait until the
EPSON folder and EPSON Printer Driver Setup
confirmation screen appear. Then click OK on the
confirmation screen to exit the installation program.
The EPSON folder contains these icons:
EPSON Calibration Utility
Spool Manager
EPSON Stylus Help
EPSON Stylus ReadMe
19. Calibrate your printer using the EPSON Calibration Utility.
See Chapter 3 for instructions.
The installation program automatically selects your printer
driver as the default printer for Windows 95 applications and
assigns the printer driver to port LPT1. If you need to change
your default printer driver or the port assignment, see your
Windows 95 online help utility for instructions. Otherwise, skip
to page 2-9 for instructions on accessing the driver.
2-6
Installing and Using the Printer Driver
To Next Page
Loading...
