What to do if my Epson Stylus 1500 is out of paper?
If your Epson Printer is out of paper, load paper in the sheet feeder, rear tractor, or manual feed slot; then press the Pause button to resume printing.
Why is text printing slow on my Epson Stylus 1500 Printer?
If text printing on your Epson printer is slow because you may be using printer driver settings that are more suitable for graphics printing, to speed up text printing only, turn off MicroWeave mode and turn on High Speed mode.
What to do if ink cartridge is low on ink or empty in Epson Printer?
If the ink cartridge of your Epson Printer is low on ink or empty, replace the indicated cartridge.
Why has my Epson Printer stopped printing, but the Pause light is off?
If printing has stopped on your Epson printer, but the Pause light is off, it could be due to empty or old ink cartridges. First, clean the print heads. If the problem persists, replace the ink cartridge(s).
How to fix carriage error on Epson Stylus 1500?
If you encounter a carriage error on your Epson Printer, turn the printer off, check for and clear any carriage obstructions (paper, etc.), and turn the printer back on. If the error persists, contact your dealer or an authorized service provider.
What to do if the paper-release lever is in the wrong position on Epson Printer?
If the paper-release lever of your Epson Printer is in the wrong position, move the paper-release lever to the position that matches the paper loaded in the printer.
What to do if Epson Printer shows a system memory error message on PC?
If you see a system memory error message on your PC and the Epson printer does not print, try closing any unnecessary applications, reducing the size of your print job, turning off the Copies options, or increasing system memory, because the Copies options in the Windows printer driver require additional system memory.
How to fix fatal error on Epson Stylus 1500?
If your Epson Printer shows a fatal error, turn the printer off and then on again. If this does not correct the problem, you can reset the printer’s factory defaults by pressing the Alt and Pause buttons.
What to do if paper-release lever was moved before paper was ejected on Epson Stylus 1500 Printer?
If the paper-release lever was moved before paper was ejected from your Epson Printer: * For continuous paper: lower the paper-release lever and press the Load/Eject button; then raise the paper release lever to the single-sheet position. * For single sheets: raise the paper-release lever; press the Load/Eject button; then lower the paper-release lever to the continuous paper position.
Why is the printed image smeared on my Epson Stylus 1500 Printer?
If the printed image from your Epson Printer is smeared, change the thickness adjustment lever setting to the + position regardless of the paper type.
General| Max Resolution (BW) | 5760 x 1440 DPI |
|---|---|
| Max Resolution (Color) | 5760 x 1440 DPI |
| Number of Cartridges | 6 |
| Borderless Printing | Yes |
| Print Speed (BW) | 15 ppm |
| Print Speed (Color) | 15 ppm |
| Print Speed (Black) | 15 ppm |
| Interface | USB 2.0 |
| Technology | Inkjet |
| Ink Palette | 6-color (Cyan, Magenta, Yellow, Black, Light Cyan, Light Magenta) |
| Connectivity | USB |
| Print Technology | Inkjet |
| Ink Colors | Cyan, magenta, yellow, black, light cyan, light magenta |
| Paper Sizes Supported | 4" x 6", 8.5" x 11" |
| Operating Systems Compatibility | Microsoft Windows XP, Apple Mac OS X 10.4.x |
To Next Page