Epson Stylus C20SX - Windows System Requirements

2
Windows
®
System Requirements
To use your printer and its software, your system should have:
■
An IBM
®
compatible PC with at least a Pentium
®
processor (for Windows 98), a Pentium
150 MHz processor (for Windows Me), or a Pentium 133 MHz processor (for Windows 2000)
■
Microsoft
®
Windows 98, Windows Me, or Windows 2000
■
RAM of at least 20MB (for Windows 98), or 32MB (for Windows Me), or 64MB (for
Windows 2000) [50MB for Windows 98, or 64MB for Windows Me or 2000 recommended]
■
At least 50MB of free hard disk space (100MB recommended)
■
VGA or better display adapter and monitor
■
Double-speed (2
x
) CD-ROM drive (quad-speed [4
x
] or faster recommended) or DVD drive
for installing the printer software
■
A computer running Windows 98, Windows Me, or Windows 2000 with a
Windows-compliant USB port and a shielded USB “AB” cable from Series A (computer) to
Series B (printer), up to 6.5 ft. (2 meters) long.
Using an improperly shielded USB cable—especially a cable more than 6.5 ft.
(2 meters) long—may cause the printer to malfunction.
Macintosh
®
System Requirements
To use your printer and its software, your system should have:
■
An Apple
®
iMac
™
series, Power Macintosh,
®
G3, or G4 with native USB port
■
Mac
®
OS 8.5.1 through Mac OS 9.1
■
At least 16MB of available RAM (32MB recommended)
■
At least 50MB of free hard disk space (100MB recommended)
■
VGA or better display adapter and monitor
■
Double-speed (2
x
) CD-ROM drive (quad-speed [4
x
] or faster recommended) or DVD drive
for installing the printer software
■
A shielded USB “AB” cable from Series A (computer) to Series B (printer), up to 6.5 ft.
(2 meters) long
Using an improperly shielded USB cable—especially a cable more than 6.5 ft.
(2 meters) long—may cause the printer to malfunction.
English