Do you have a question about the Epson Stylus C42UX and is the answer not in the manual?
Color | Yes |
---|---|
Maximum resolution | 2880 x 720 DPI |
Print speed (black, normal quality, A4/US Letter) | 12 ppm |
Print speed (color, normal quality, A4/US Letter) | 5.5 ppm |
Interface | USB |
Print technology | Inkjet |
Weight (imperial) | 6.3 lbs |
Power requirements | 120V/50-60 Hz |
Total input capacity | 100 sheets |
Compatible operating systems | Windows 98/2000/Me/XP, Mac 8.5.1 - 9.x, Mac OS X 10.1+ |
Power consumption (printing) | 19 W |
Printing noise level | 48 dB |
Storage temperature (T-T) | -20 - 60 °C |
Operating temperature (T-T) | 10 - 35 °C |
Storage relative humidity (H-H) | 5 - 85 % |
Operating relative humidity (H-H) | 20 - 80 % |
Paper tray media types | Envelopes, Glossy paper, Iron-On Transfers, Photo paper, Plain paper, Transparencies |
Non-ISO print media sizes | Executive (184 x 267mm), Legal (media size) |
Market positioning | Home & office |
Depth | 459.74 mm |
---|---|
Width | 424.18 mm |
Height | 276.86 mm |
Remove the tape and packing material from the printer, including the tape beneath the cover.
Insert the paper support into the three slots on the back of the printer.
Connect one end of the power cord to the printer and the other to a grounded electrical outlet.
Press the power button until the green power light illuminates to turn the printer on.
Open the printer cover and lift the ink cartridge clamps.
Unpack cartridges, remove tape, insert them, and press clamps until they click shut.
Set paper behind the tab on the right edge guide.
Press the locking tab and slide the left edge guide against the paper.
Pull out the output tray to receive printed documents.
Connect the USB cable to the printer and then to your computer's USB port.
Follow on-screen instructions for Windows XP, including inserting the CD and completing installation.
Install the printer manual icon to your desktop for viewing.
Open a document, select Print, then adjust Properties/Preferences for document type and paper.
Print a test page to confirm the printer is set up correctly.
Follow on-screen instructions to install the printer software and restart your Macintosh.
Copy the ES C42 Manual icon to your desktop from the CD-ROM.
Follow on-screen instructions to install and restart your Macintosh.
Double-click the Manual folder and then the ES C42 Manual icon.
Ensure printer is on and USB cable is connected; reinsert cable if screen doesn't appear.
Use smooth paper, do not load above the arrow, and ensure paper is against the right edge.
Red error light indicates low ink or empty cartridge; press maintenance button to resolve.
Press maintenance button for 10 seconds to move print head, then lift clamp to remove cartridge.
Use genuine EPSON inks and paper for best results; purchase from retailers or EPSON Store.
Access support via World Wide Web (http://support.epson.com) or Automated Telephone Services.