Epson Stylus Color 980 Daily Use

36
R4C623
short.bk Rev_C
A5 size MAINT.FM
10/18/00 Pass 0
L
Proof Sign-off:
Ichihara _______
N.Nomoto _______
R.Thomson _______
Aligning the Print Head
If you notice a misalignment of vertical lines, you may be able to
solve this problem using the Print Head Alignment utility in your
printer software. Follow the directions in the appropriate section
below.
Note:
Do not start the Print Head Alignment utility while printing is in
progress; otherwise, your printout may be marred.
For Windows users
Follow the steps below to align the print head.
1. Make sure that A4 or Letter size plain paper is loaded in the
sheet feeder.
2. Click the
Utility
tab in the printer driver, then click the
Print
Head Alignment
button.
3. Follow the on-screen instructions to align the print head.
For DOS users
Follow the steps below to align the print head.
1. Insert the printer software CD in your CD-ROM drive.
2. Type
D:\SETUP
at the DOS prompt. (If your CD-ROM drive
is assigned a drive letter other than "D", or if you are using the
floppy disk version, substitute the appropriate letter.)
3. Press the
Enter
key, then follow the on-screen instructions.
4. After running the setup program, type
C:\EPCALIB2
. (If your
hard drive is assigned a drive letter other than “C”, substitute
the appropriate letter.)

Epson Stylus Color 980 Specifications

General

Brand	Epson
Model	Stylus Color 980
Category	Printer
Language	English