EPSON Stylus CX3700/CX3800/CX3805/CX3810/DX3800/DX3850 Revision A
DISASSEMBLY/ASSEMBLY Printer Section 105
External view (2)
Figure 4-12. Removing Printer Mechanism (2)
4. Remove the screws (x6, ) that secure the Printer Mechanism.
5. Dis
connect the PS Connector Cable from the connector (CN1) of the Main
Board.
6. Lift up the Prin
ter Mechanism, and remove the whole Printer Mechanism
from the Housing, Lower.
1
4
65
2
3
Printer Mechanism
CN1
Main Board
PS Connector Cable
C.B.P. 3x8 F/Zn
(4±1kgfcm)
Guide Pin
Holding Positions
CR Guide Frame
C A U T I O N
Hold the designated position and lift Printer Mechanism upward
when performing the following step in order to prevent warping of
Main Frame.
To Next Page
Loading...
