Epson Stylus CX3700 - Page 108

EPSON Stylus CX3700/CX3800/CX3805/CX3810/DX3800/DX3850 Revision A
DISASSEMBLY/ASSEMBLY Printer Section 108
4.4.10 Waste Ink Pads/Stacker Lock/Rubber Feet
 External view (1)
Figure 4-16. Removing Waste Ink Pads
 Part/Unit
that should be removed before removing Waste Ink Pads/Stacker
Lock/Rubber Feet
Document Cover / Paper Support Assy. / Stacker / Scanner Unit / Panel Unit /
Housing, Upper / Printer Mechanism
 Removal procedure
 Waste Ink Pads Removal
1. Remove the Waste Ink Tube along with the Tube Clamp and the Eject Ink
Joint from the groove of the Housing Lower.
2. Remove five pieces of the
Waste Ink Pads and the Waste Ink Cover from the
Housing, Lower.
Tube Clump
Eject Ink
Joint
Waste Ink Tube
and Groove