EPSON Stylus CX3700/CX3800/CX3805/CX3810/DX3800/DX3850 Revision A
ADJUSTMENT Overview 136
C A U T I O N
When the Main board is replaced with new one, you may have
to replace waste drain ink pad also in case the EEPROM
parameter back up function is not available on the defective
main board.
After completing the adjustment, check the
printing result with
A4 check pattern by using the Adjustment program.
If the result is not good, perform appropriate adjustment.
If using new main board in the printer mechanism replacement,
you need to perform EEPROM initial setting of main board.
And then, please perform the adjustment by usual procedure.
To Next Page
Loading...
