Solving Problems 19
English
✽ These errors do not appear on the EPSON STYLUS DX4200 Series.
k
b Error
k Print From
Index Sheet
Code 4
✽
The index sheet does not
match the photos on the
memory card.
Remove the memory card and insert the card used to print the index sheet—or place
the correct index sheet on the document table. Then press x Start Color to continue
or y Stop to cancel.
k
b Error
k Print All/DPOF/
PictBridge✽
Code P double
flashing
An unsupported device is
connected.
Remove the connected device or press the y Stop button.
When the digital camera is supported, the P flashes normally.
k
b Error
Code H
The paper thickness lever
is set to the ^ position.
If you have set the lever to the ^ position because you are printing envelope(s),
press x Start Color to continue. Otherwise, set the lever to the m position.
O
b Error
OB
k All other lights
Code E
A part on the EPSON
STYLUS DX needs to be
replaced.
Contact your local authorized service center or contact Epson for a referral. &
“Customer Support” on page 21
k All lights
Code E
There is a problem with the
EPSON STYLUS DX.
Turn the EPSON STYLUS DX off and then back on. If the error does not clear, contact
your local authorized service center or contact Epson for a referral. & “Customer
Support” on page 21
Lights/Code Cause Solution
To Next Page
Loading...
Need help?
General
