Setting Up Your Printer
21
Tasmania
shortset.bk Rev. C
A5 size SETUP.FM
10/7/99 Pass 2
R
Proof Sign-off:
K. Nishi _______
N.Nomoto _______
J.Hoadley _______
Connecting the Printer to Your Macintosh
Note:
To connect to an iMac computer using the USB port, see the USB User’s
Guide shipped with your printer.
To use the printer's built-in serial interface, you will need an
Apple System Peripheral-8 cable.
Follow these steps to connect the printer:
1. Make sure both your printer and Macintosh are switched off.
2. Connect one end of the interface cable to the serial connector
on the back of the printer.
3. Connect the other end of the interface cable to either the
modem port or printer port on the Macintosh. The ports are
marked with the following icons.
modem port
printer port
To Next Page
Loading...
