#"$
The Halftoning and
Color Management
options are set
incorrectly for your
document type.
Use the correct settings for the project you’re printing, following the
instructions in Customizing Print Quality and Special Effects
and
Customizing Color Settings.
The printable side of
the paper is face
down.
Remove the paper and reload it with the printable side face up. See
Paper Loading and Handling Guidelines
for instructions.
The ICM (Windows 95
or Windows 98 only),
sRGB (Windows 98),
or ColorSync
(Macintosh) setting is
incorrect for your
document.
Use the Automatic mode setting or choose a different Rendering Intent
setting (Macintosh). See Custom Printing
and Using ColorSync on the
Macintosh for more information.
The print head nozzles
are clogged.
Clean the print head. See Cleaning the Print Head
for instructions.
The ink cartridges are
low on ink or one or
more ink colors are
empty.
Check the
B black and
A color ink out lights to see which cartridge you
may need to replace. See Replacing an Ink Cartridge for instructions.
Possible cause Solution
To Next Page
Loading...
