4 Type a name (up to 24 characters) for your custom paper size in the
Paper Size Name field. Then select a Paper Width and Paper Height
for the paper. To use centimeters instead of inches, click the 0.01cm
option. When you’re finished, click Save. The paper size name
appears in the Paper Size list in the dialog box. Add more sizes if you
want, and click OK when you’re done.
5 You see the Paper tab again. The paper size name you defined is
added to the Paper Size list and selected as the current setting.
6 Click a tab for the settings you want to check or change next, or click
OK to print your document.
1 Click User Defined in the Paper Size list.
2 In the User Defined Paper Size dialog box, select the custom paper
name in the Paper Size list and change the Paper Width, Paper
Height, and Unit settings as necessary, or click Delete.
3 Click OK when you’re done.
%
The Paper Size and Orientation options for your printer software are on
the Page Setup dialog box. The options for collating and reversing the
page order are on the Layout dialog box. Follow the steps in these
sections for selecting the paper options:
◗ Choosing Paper Size and Orientation Options
◗ Selecting Print Order Options
The Paper Width and
Paper Height units
are in hundredth of an
inch (or centimeter)
increments. For
example, 850 equals
8.50 inches.
To Next Page
Loading...
