64
Printing on a CD/DVD with Windows
After you have created your design and loaded a CD or DVD, you’re ready to print.
1. Open the File menu and select Print.
2. Make sure EPSON Stylus Photo 1410 Series is selected.
3. Select CD/DVD or CD/DVD Premium Surface as the Media Type setting.
4. Select None as the Print Confirmation Pattern setting.
5. Click Print.
Note:
When you set the Copies setting to 2 or more, remove each CD or DVD from the
tray after it has been printed, and then place the next disc on the tray (see
Inserting a CD or DV
D). Press the paper button to resume printing.
After you print, handle the CD or DVD carefully. Allow the ink to dry at least
24 hours before playing the disc or inserting it in a drive. Keep printed discs away
from moisture and direct sunlight.
Note:
If printing on a full face (hub-printable) disc, you may need to adjust the print
position to maximize the print area.
Select EPSON
Stylus Photo
1410 Series
Select your CD
or DVD type
Click
None
To Next Page
Loading...
