92
Note:
If the red ink light stays on, an ink cartridge may not be installed correctly.
Open the printer cover and press the ink button two or more times. Then open
the cartridge cover and press down all the ink cartridges until they click into place.
Close the cartridge and printer covers, and press the ink button to charge the
ink.
Aligning the Print Head
If your printouts look grainy or blurry, or you see light or dark lines, you may need to
align the print head.
Note:
You may also see lines in your printouts if your cartridges are low on ink or you
need to clean the print head.
Before you align the print head, make sure the CD/DVD tray is not inserted in the
printer.
1. Turn on the printer.
2. Load several sheets of paper, preferably Epson Presentation Paper Matte.
3. Make sure the paper and ink lights are not flashing or on.
4. Windows: Right-click the printer icon on your taskbar (in the lower right
corner of your screen). Select Print Head Alignment.
Macintosh: Open the Applications folder and select EPSON Printer Utility3.
Select SP 1410 Series in the printer list, click OK, and select Print Head
Alignment.
To Next Page
Loading...
