Epson stylus photo 1410 - Page 67

67
9. Click OK to save the measurements.
Adjusting the Print Density with Windows
If ink smears on your printed CDs or DVDs, you may need to adjust the color
saturation or ink density. CDs and DVDs from different manufacturers may absorb
ink differently, so you may need to adjust the density for each type of disc. Follow
these instructions to print a color saturation check pattern, and then make
adjustments as necessary.
1. Place an extra ink jet-printable CD or DVD on the CD/DVD tray and insert it
into the printer, as described in Inserting a CD or DVD.
2. Start Epson Print CD.
3. Open the File menu and select Print.
4. Make sure EPSON Stylus Photo 1410 Series is selected, then click Print
Density Confirmation Pattern
.
5. Click Print.
6. After the pattern is printed, examine the print.