Epson stylus photo 1410 - Page 71

71
Printing on a CD or DVD with a Macintosh
After you have created your design and loaded a CD or DVD, you’re ready to print.
1. Open the File menu and select Print.
2. Click the Select Printer button and select EPSON Stylus Photo 1410 or
Stylus Photo 1410 from the printer list, then click OK.
3. Select CD/DVD or CD/DVD Premium Surface as the Media Type setting.
4. Select None as the Test Print Pattern setting.
5. Click Print.
Note:
When you set the Copies setting to 2 or more, remove each CD or DVD from the
tray after it has been printed, and then place the next disc on the tray (see
Inserting a CD or DV
D). Press the paper button to resume printing.
After you print, handle the CD or DVD carefully. Allow the ink to dry at least
24 hours before playing the disc or inserting it in a drive. Keep printed discs away
from moisture and direct sunlight.
Note:
If printing on a full face (hub-printable) disc, you may need to adjust the print
position to maximize the print area.
If you need to adjust the print position or the color, see one of these sections:
Adjusting the Print Position with a Macintosh
Click here and select
EPSON Stylus Photo 1410
or Stylus Photo 1410
Select your CD
or DVD type
Click None