Epson stylus photo 1410 - Page 74

74
3. Open the File menu and select Print.
4. Make sure EPSON Stylus Photo 1410 or Stylus Photo 1410 is selected, then
click Print Density Check Pattern.
5. Click Print.
6. After the pattern is printed, examine the print.
If you need to adjust the color, make the Color Correction setting lighter or
darker as necessary. Then repeat these steps, but select either Second Time or
Third Time as the Print Density Check Pattern Position setting to print your
second or third pattern on the disc.
Note:
You can print three density patterns on one disc. Each pattern is printed in a
different location.
7. Remove the CD or DVD and let it dry for at least 24 hours. Then check the
saturation levels again.
Note:
You can also use the Brightness and Contrast settings in Epson Print CD to adjust
color saturation. For additional information, open the Help menu in Epson Print
CD and select EPSON Print CD Help.