81
Using Your Computer to Clean the Print Head
1. Make sure the printer is turned on but not printing, and the red ink light is
off. (If the red ink light is flashing or on, you need to replace a cartridge.)
2. Windows: Right-click the printer icon on your taskbar (in the lower right
corner of your screen). Select Head Cleaning.
Macintosh: Open the Applications folder and select EPSON Printer Utility3.
Select SP 1410 Series in the printer list, click OK, and select Head Cleaning.
You see a screen like the following:
3. Click Start or Next.
The printer cleans the print head and the green power light flashes. Cleaning
takes about two minutes.
Caution:
Never turn off the printer while head cleaning is in progress. You may damage it.
4. When the green power light stops flashing, make sure paper is loaded in the
printer, click Print Nozzle Check Pattern and click Print.
To Next Page
Loading...
