EPSON Stylus PHOTO 2100/2200 Revision B
TROUBLESHOOTING Troubleshooting 113
Table 3-19. Phenomenon-Based Abnormal Noise Check Points
Occurrence Timing Phenomenon Detail
Faulty Part/Part
Name
Check Point Remedy
- Printing operation is performed
normally but abnormal noise is
produced at power-on or between
operations.
CR unit 1. Check that oil is fully applied on the CR guide shaft A. 1. Wipe the oil applied on the CR guide shaft A,
change the Oil pad for a new one, and apply
oil.
To Next Page
Loading...
