Epson Stylus Photo 2100 - Page 20

EPSON Stylus PHOTO 2100/2200 Revision B
PRODUCTION DESCRIPTION Basic Specifications 20
2. At the setting of top margin to 0mm
Top off-range printing prints the area a, and nozzle-restricted
printing prints the area c. After the #1 nozzle has passed through the
area c, nozzle restriction is canceled.
c = 66/360 (4.7mm) Nozzle-restricted printing area
#1 to #22 A total of 22 nozzles Nozzle restriction
Figure 1-6. Head Movable Area for 0mm Top Margin
2) Bottom head movable area
1. At the setting of bottom margin to 14mm
Figure 1-7. Head Movable Area for 14mm Bottom Margin
2. At the setting of bottom margin to 3mm
Figure 1-8. Head Movable Area for 3mm Bottom Margin
Paper Type Exclusive Paper
Other than
Exclusive Paper
Any Paper Type
Recording paper width
(Main scanning method)
Less than 150mm Less than 150mm 150mm or more
a = Off-range printing
area
25/360 (1.76mm) 25/360 (1.76mm) 38/360 (2.68mm)
b = Skip amount 17/360 (1.20mm) 17/360 (1.20mm) 4/360 (0.28mm)