Epson Stylus Photo 2100 - Page 90

EPSON Stylus PHOTO 2100/2200 Revision B
TROUBLESHOOTING Troubleshooting 90
Table 3-10. Phenomenon-Based Ink Color Error Check Points
Occurrence Timing Phenomenon Detail
Faulty Part/
Part Name
Check Point Remedy
The Ink cartridge was
changed during
printing due to Ink
end/low.
When you changed the Ink
cartridge and pressed the Ink
switch, the error appears on the
LED and EPW3.
Ink cartridge 1. Check that the old and new Ink cartridges are the same. 1. Insert the new Ink cartridge that is the same as
the old one.
Table 3-11. Phenomenon-Based Ink Level Low Error Check Points
Occurrence Timing Phenomenon Detail
Faulty Part/
Part Name
Check Point Remedy
During printing The message appears on the LED
and EPW3 during printing.
Ink cartridge 1. Look at the remaining ink indication of the EPW3 to check the
amount of the ink remaining in the Ink cartridge.
1. Prepare a new Ink cartridge.
Table 3-12. Phenomenon-Based Ink End Error Check Points
Occurrence Timing Phenomenon Detail
Faulty Part/
Part Name
Check Point Remedy
During printing The error appears on the LED and
EPW3 after the Carriage has
returned to the home position.
Ink cartridge 1. Look at the remaining ink indication of the EPW3 to check
whether the ink remains in the Ink cartridge.
1. Change the Ink cartridge for a new one.