Epson Stylus Photo R1900 Series - Printing from Start to Finish; Printing in Windows

16 Printing From Start to Finish
Printing From Start to Finish
This section describes basic printing from your Windows
®
or Macintosh
®
computer. For detailed instructions, see the on-screen Reference Guide.
You can also print label designs directly onto ink jet-printable CDs or DVDs. See
page 30 and the on-screen Reference Guide for details.
To print photos directly from a PictBridge-compatible digital camera connected to
the R1900 Series, see the on-screen Reference Guide.
Tip:
It’s a good idea to check for updates to your Epson Stylus Photo R1900 Series software.
See “Checking for Software Updates” on page 41 for instructions.
Printing in Windows
1. Open a photo or document in a printing program, open the File menu, and
select
Print.
2. Select
EPSON Stylus Photo R1900 Series and click the Preferences or
Properties button.
Note:
If you see a Setup, Printer, or Options button, click it. Then click Preferences or
Properties on the next screen.
Click here to open
your printer software
Select EPSON Stylus
Photo R1900 Series