15
Sawgrass Technologies, Inc.~Epson
®
R1900~ChromaBlast™
BULK INK SYSTEM QuickConnect
®
Installation: Tips
• Make sure you install ChromaBlast Driver from the CD you
received with your QuickConnect
®
Bulk Ink System. Refer to the
ChromaBlast Driver Documentation and the Video Tutorial on how
to use ChromaBlast Driver.
• Perform a Nozzle Check from ChromaBlast Driver. A few cleaning
cycles may be necessary to get a good Nozzle Check.
• You may want to employ the clear plastic holders to reliably prop open the printer lid so that it
remains open all of the time.
• There may be small pockets of air in the lines after setup. If so, these will clear after a
few prints are run.
• If the System is to be dormant for several days, use the Tube Clamps to seal the lines
at the Reservoir Box. Maintain the Reservoir Box at the height of the printer, never
raised above.
To Next Page
Loading...
