Sawgrass Technologies, Inc. ~ www.sawgrassink.com
iv
IMPORTANT – READ CAREFULLY:
This product is for commercial use only.
This Process License Agreement (“PLA”) is a legal agreement between you and
Sawgrass Technologies, Inc. (“Sawgrass”). By installing the ChromaBlast
™
cartridge
in your printer, or otherwise using the Sawgrass ChromaBlast
™
ink, you agree to be
bound by the terms of this PLA. If you do not agree to the terms of this PLA, Sawgrass
is unwilling to license the process of using the ChromaBlast
™
ink to you. In such event,
you may not use the ChromaBlast
™
ink, and you should promptly contact your supplier
for instructions on return of the unopened package.
The process of using ChromaBlast
™
ink is protected by U.S. and foreign patents.
Sawgrass will provide a complete list of the relevant patents upon request. The use of
the ChromaBlast
™
ink to practice the patented process is permitted by this license.
1. GRANT OF LICENSE.
This PLA grants you the following rights:
You may install and use the ChromaBlast
™
ink packaged herewith in your EPSON
printer to practice the printing process described in U.S. Patent No. 6,341,856
(“Sawgrass Process”). The use of any ink, dye or pigment to practice the Sawgrass
Process, other than a ChromaBlast
™
ink purchased from Sawgrass or its authorized
distributor accompanied by a PLA, is not a licensed use of the Sawgrass Process.
No rights to use the Sawgrass Process, except those specified herein, are granted,
and no rights to use any other process, product, software or hardware developed or
sold by Sawgrass are granted or implied hereby.
2. LIMITATIONS ON REVERSE ENGINEERING
You agree that you will not attempt to reverse engineer, reproduce or deformulate
the ChromaBlast
™
ink.
3. PATENTS AND COPYRIGHTS
Sawgrass owns multiple U.S. and foreign patents which may apply to the Sawgrass
Process and/or the use of ChromaBlast
™
ink. All patents in and to the method of
using ChromaBlast
™
ink are owned by Sawgrass Technologies, Inc. You may
not copy the printed materials accompanying the ChromaBlast
™
ink. All rights not
specifically granted under this PLA are reserved by Sawgrass Technologies, Inc.
Sawgrass agrees to replace any defective product, within a reasonable time, which shall
be Sawgrass’ sole responsibility for errors or defects in the goods. THERE ARE NO
OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. SAWGRASS SHALL NOT BE LIABLE FOR LOSS OF PROFIT OR OTHER
ECONOMIC LOSS, OR FOR INDIRECT, SPECIAL, CONSEQUENTIAL OR OTHER SIMILAR
DAMAGES.
Rev.2.0_022509JCR
To Next Page
Loading...
