Sawgrass Technologies, Inc. ~ www.sawgrassink.com
32
Figure 4
3) In Figure 3, you must set preferences according to the printing you require, either
Bitmap or Vector Artwork, or “No Color Management”. You need also choose
“Photographic” or “Graphics”, Paper Size, Number of Copies,“High Speed” or
“High Quality”, “Mirror” or not, and“ColorSure”Involvement, if any. Once this is
done, click on “Apply”, then click “OK” to return to the “Print” Window (Fig. 2).
Here, click on “Apply”, and then “Print”.
To Next Page
Loading...
