Epson Stylus Photo R1900 - Page 60

Sawgrass Technologies, Inc. ~ www.sawgrassink.com
52
 • Ensure you pressed the item with the proper time, temperature, and pressure.
For guidelines, see the section entitled ChromaBlast Transfer Instructions,
Page 8.
 • Verify your printer driver settings are correct. Please see the relevant section
of the User’s Guide for additional information.
• Ensure your substrate is designed to accept a ChromaBlast transfer. Garments
made from natural fibers such as Cotton are compatible with the ChromaBlast
sublimation process.
My image looks blurred.
 • Ensure you pressed the item with the proper time, temperature, and pressure.
For guidelines, see the section entitled ChromaBlast Transfer Instructions,
Page 8.
 • Ensure you printed on the correct side of the media. The print side
is opposite the LOGO side of the media.
 • Verify that the printer’s print heads are properly aligned. For further instructions,
see the Epson Stylus Photo Printer Quick Reference Guide.
My image has gaps or bands present.
 • Ensure that all of the printer’s nozzles are firing properly. Perform a Nozzle
Check from the Utility Tab of your printer driver. For further instructions, see
the Epson Stylus Photo Printer Quick Reference Guide.
 • If one or more of the nozzles fail to print, perform a Print Head Cleaning. For
Further instructions, see the Epson Stylus Photo Printer Quick Reference Guide.