18 Other Creative Printing Options
❏ When you press the G [Display/Crop] button once, you
see a yellow frame. You can use this to crop out the rest of
the photo and print just the main subject. See “Cropping and
Sizing Your Photos” on page 21.
8. Press the Copies + or - b ut ton to se le ct t he nu mbe r
of copies for each photo.
Note:
❏ When you select only one photo, 16 copies of the same
photo are printed on one sheet. If you select two or more,
the number of copies you set for each is printed in a 16-up
layout and unused areas of the layout are left blank.
❏ To select more than one photo, repeat steps 7 and 8 to
select other photos and the number of copies for each.
❏ You can confirm the print settings by pressing the OK
button.
9. Press the x Start button to print.
If the printing is misaligned
When you print on Photo Stickers with a 16-up layout,
you can adjust the print position.
1. Press the F [Setup] button to open the Setup
menu.
2. Press the l or r button to highlight Adjust CD
Print Alignment and press the OK button.
3. Press the u or d button to highlight Sticker and
press the r button.
4. Select the amount to move the image. You can
select from 0 mm to 2.5 mm.
5. Press the OK button to set the changes you made.
Note:
The printer remembers the print adjustment setting even after
it has been turned off, so you do not need to adjust the position
each time.
To Next Page
Loading...
