EasyManua.ls Logo

Epson Stylus Photo RX580 - Printing Camera-Selected DPOF Photos; Restoring Default Settings

Epson Stylus Photo RX580
95 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40 Printing From a Memory Card
11. Load enough sheets of the paper that you chose in the sheet feeder. (See
page 7 for paper loading instructions.)
12. Press the x
Start button to print.
Note:
If you need to cancel printing, press the y Stop/Clear Settings button.
After you print your cards, you need to cut them. Then you can insert the cards
into envelopes and mail them.
Printing Camera-Selected DPOF Photos
If your camera supports DPOF (Digital Print Order Format), you can use it to
preselect photos and the number of copies to print while the memory card is still
in your camera. See your cameras manual for details.
1. Load paper as described on page 7.
2. Insert the memory card containing preselected
photos, as described on page 22. You see this screen:
3. Press
OK to print your preselected photos.
4. Press the x
Print Settings button and select
settings as necessary. See page 28 for instructions.
5. Press the x
Start button to print.
Note:
If you need to cancel printing, press the y Stop/Clear Settings button.
Restoring Default Settings
Follow these steps to return all the RX580 settings to the factory defaults:
1. Press the
Setup button.
2. Press l or r to select
Restore Default Settings, then press OK.
3. Press
OK again to restore settings to their factory defaults.
RX580.book Page 40 Thursday, July 27, 2006 4:04 PM

Table of Contents

Other manuals for Epson Stylus Photo RX580

Related product manuals