Copying onto a CD/DVD 51
Adjusting the Print Position
If your photo is not centered on the CD or DVD, you may need to adjust the
print position.
1. Press the
Setup button.
2. Press l or r to select
Print Position, then press OK.
3. Press r to display the position screen.
4. Press d, u, l, or r to adjust the position up to
2 mm in any direction. Then press
OK.
5. Press
OK again to save your changes and return to
the Setup menu.
Note:
The RX580 remembers this setting even after it has been turned off, so you only
need to adjust the dimensions once for a batch of CDs or DVDs.
Copying onto a CD/DVD
You can copy a printed photo, document, artwork, or CD label directly onto a
CD or DVD.
Note:
The RX580 does not copy music, video, or other CD/DVD contents.
1. Insert your CD or DVD as described on page 46.
RX580.book Page 51 Thursday, July 27, 2006 4:04 PM
To Next Page
Loading...
