Epson Stylus Photo RX600 - Replacing an Ink Cartridge

58 Replacing Ink Cartridges
Replacing an Ink Cartridge
Follow the steps below to replace ink cartridges.
Note:
Before replacing an ink cartridge, read “Precautions on Ink Cartridge
Replacement” on page 57 and “When handling ink cartridges” on page 7.
1. When the ink is empty:
Refer to the LCD panel message to see which ink cartridge is empty,
and then press the OK button.
When the ink is low:
Press the Setup button and select Ink cartridge by pressing the
u/d button, then press the OK button. Confirm the messages on the
LCD panel and press the OK button to start the ink cartridge
replacement.
The ink cartridges move to the replacement position.
2. Make sure that the document cover is closed, and then open the
scanner unit.