Epson Stylus Photo RX600 - Loading Paper; Loading Single Sheets

13
3 Insert your memory card into the correct slot. Be careful not to
force it in (it won’t go in all the way).
Note:
Do not insert more than one card.
4 The memory card light flashes, then turns green. Close the cover.
If the light doesn’t turn green, or if you see the message
No memory card. Operation Canceled on the RX600 screen,
the card may be inserted incorrectly or may not be supported.
Note:
To remove the card, first make sure your RX600 is not printing and the
memory card light is not flashing. Then open the memory card slot
cover and pull the card straight out of the slot.
CompactFlash
™
or
Microdrive
™
(bottom)
Memory Stick
®
(middle)
SD or MMC
(middle)
SmartMedia
™
(top)
xD
(top)
Memory card light