9
Printing a Photo from 35 mm Film
Follow these steps to print a 4 × 6-inch photo from a 35 mm film
negative. (For slides, and additional page size and layout options, see
your User’s Guide.)
1 Make sure the cable is connected to the
TPU (transparency unit)
interface connector. (If it is not connected, turn off the RX600,
connect the cable, then turn the RX600 back on.)
2 Press the P
On button to turn on the Stylus Photo RX600.
3 Open the output tray.
Output tray
To Next Page
Loading...
