8 Copying
2. Flip the feeder guard forward.
3. Slide the edge guide to the left.
4. Load your paper and slide the
edge guide lightly against it.
Never load more sheets than can
fit under the arrow mark on the
edge guide.
Note:
If you’re using special Epson paper, follow any instructions that came with it. For
example, some types of paper should be loaded only one sheet at a time. See your
on-screen Reference Guide for details.
To ensure good results, always:
■ Load paper with the printable side up (it’s usually whiter or brighter).
■ Check the RX620’s Paper Type setting before printing to make sure it matches the
type of paper you’ve loaded (see page 12).
Feeder guard
To Next Page
Loading...
