R
5
R41A0E84P
Unpacking and Setup Guide
Rev.D
ENGLISH.FM A4 size
6/19/07
Proof Sign-off:
AVA M.Arai K.Nishi
K.Nishi
Latex H.Nicholas
English
Mounting the Printer on the Base
Unit
w
Warning:
Do not attempt to lift the printer unit (about
127.3 kg) with fewer than four people.
1. Lock the two front casters.
Place the casters sideways and lock them so
they will not move.
2. Position the base unit in front of the printer,
and then mount the printer on the base unit as
shown below.
Note:
When you place the printer on the base unit, match
the right end square of the printer to the square of
the same part of the base unit.
3. Fasten the bottom of the printer and base unit
with wing nut, spring washers, and washers.
Caster lock
top view
To Next Page
Loading...
