conditions described in the next paragraph. No further renewal of extended service is available
after that time.
In order to qualify for a one-year renewal of extended service, your printer must still have at
least 40% of the manufacturer-specified carriage motor life remaining. The information on the
remaining carriage motor life can be obtained from the printer Control Panel in SelecType
mode: Menu > Printer Status > Service Life. At least two stars (of the printer’s original five
stars) must be displayed. Even if the printer has sufficient carriage motor life, Epson may still in
its discretion not allow renewal based on the printer’s service and usage history.
Purchase After the One-Year Warranty Period
Epson may in its discretion allow you to purchase our one-year extended service plan after
expiration of your printer’s original warranty period, subject to the conditions described below.
No renewal is available after that one year of extended service.
In order to qualify for purchase of our one-year plan after expiration of the warranty:
• The printer must be no more than two years old based on initial shipment data from
Epson’s warehouse.
• The printer must still have at least 40% of the manufacturer-specified carriage motor life
remaining. See above (under “Purchase During the One-Year Warranty Period”) for how to
check this.
• At your expense, maintenance service (or, if the printer is currently malfunctioning,
then a time and material repair) must be performed by an Epson Authorized Customer
Care Center, to be sure that the printer is in good working condition and meets Epson’s
field repair specifications. The one-year Preferred Plus Plan must be purchased within 30
days of this service or repair.
You can obtain detailed terms and pricing information, and purchase a one- or two-year
Preferred Plus Plan, from your participating Epson Stylus Pro dealer or from the Epson
Store
SM
at http://www.epson.com.
EPSON
Preferred
Limited Warranty Program for the EPSON Stylus
®
Pro 4800
SM
®
To Next Page
Loading...
