4) Turn off the printer. Make sure the print head is in the home (far right) position. Lock the
print head by pushing the green tab to the right.
5) Unplug the power cord and raise the ink levers.
CAUTION: Do not turn off the printer by unplugging it or turning off a power strip. You will
not be able to lock the print head in the home position, and ink left inside the reservoir will
leak out, damaging the printer.
6) If you have installed any optional components (for example, the EpsonNet print server card),
remove them before shipping.
WARNING: Components may be hot. After turning off and unplugging the printer, make
sure you allow each component to cool before handling it.
7) If you need to ship the printer, repack it using the original box and packing materials. If you
do not have the original box or packaging, contact Epson to arrange to obtain these. You
will be charged a shipping and handling fee.
8) If you are transporting the printer for carry-in service, leave the ink cartridges installed and
raise the ink levers to lock the ink valves. For carry-in service, you do not need to package
the printer, but you must transport it in a horizontal position on a flat, stable surface. If you
are transporting the printer in your own vehicle without the original packaging, make sure
you wrap and pack the printer securely.
What This Warranty Does Not Cover:
This warranty does not cover:
1) Any damage caused by using improper packaging materials or improper packaging and
shipping. Under the Whole Unit Exchange or Repair Programs you may be billed for these
damages.
2) Any damage caused by using unsuitable inks or ink delivery systems in the printer.
To Next Page
Loading...
