Epson Stylus SX405 - Page 157

EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C
MAINTENANCE Overview 157
Confidential
Figure 6-9. Lubrication on the Guide Rail of the Lower Scanner Housing
<Lubrication Point>
On the surface of the Guide Rail
of the Lower Scanner Housing.
<Lubrication Type>
G-45
<Lubrication Amount>
Sufficient quantity
<Remarks>
 Use a brush to apply G-45.
 Follow the procedures below.
1. Move the CIS Assy to the right
and apply grease on the rail.
2. Move the CIS Assy to the left
and apply grease on the rail.
3. If the CIS Assy is
contaminated with grease,
wipe off the grease with a
cloth.
1
2
Guide Rail of Lower
Scanner Housing
CIS Assy