201
• If you are using non-Epson media, make sure you create a custom paper configuration for the media.
• Make sure the Paper Size Check setting is set to On, or the printer may print outside the edges of the
loaded paper and smear ink on the back of the print.
• Depending on the print density and type of paper you are using, the ink may take a while to dry. Do not
stack the prints until the ink is completely dry.
Parent topic: Solving Print Quality Problems
Related references
Paper Menu Settings
Printer Setup Menu Settings
Related tasks
Creating Paper Configurations
Margins Appear in Borderless Prints
If borderless prints still have margins, try these solutions:
• Check the print settings selected in your print application you are using, as well as the printer driver.
• Make sure that the paper settings on the LCD screen match the paper you loaded.
• Make sure borderless enlargement is not set to Min in the printer driver.
• Paper that is stored incorrectly may expand or contract. Make sure you have stored the paper
according to the manufacturer's specifications.
• Check that the paper you are using supports borderless printing.
• If you are using roll paper, change the Adjust Cut Position setting. This may reduce the margins at
the top and bottom of the print.
Parent topic: Solving Print Quality Problems
Related references
Maintenance Menu Settings
Paper Menu Settings
Borderless Paper Type Compatibility
Related tasks
Selecting Roll Paper Settings - OS X
To Next Page
Loading...
Need help?
General
