34
6. Pull up the tension levers on the roll media adapters and remove the adapters from both ends of the
paper roll.
7. Rewind the paper carefully and place it in its original package.
Note: Store roll paper on its end or horizontally (if the packaging end-caps are installed). Never store
roll paper on its edge, as a flat spot can develop and lead to imaging artifacts on the prints.
Parent topic: Roll Paper Handling
Related topics
Using the Auto Take-up Reel
Cut Sheet Handling
You can load a variety of types and sizes of cut sheet paper in your product.
Loading Cut Sheets
Loading Thick or Large Cut Sheets
Adjusting the Platen Gap
To Next Page
Loading...
