5. Follow the instructions on the LCD screen to complete WPS setup.
6. Press the home button to exit.
Your product should now be connected to the network.
Parent topic: Wi-Fi Protected Setup (WPS)
Printing a Network Status Sheet
You can print a network status sheet to help you determine the causes of any problems you may have
using your product on a network.
1. Press the home button, if necessary.
2. Press the setup button.
3. Select Network Status.
4. Select Wi-Fi/Network Status.
You see a screen like this:
Note: If you are connected to a wireless network, the signal strength is also displayed.
5. Select Print.
6. Select Print again to print the network status sheet.
Examine the settings shown on the network status sheet to diagnose any problems you have.
Parent topic: Wi-Fi or Wired Networking
34
To Next Page
Loading...
