Epson SureColor SC-P8500DM Series - Page 153

Item Setting/Additional Explanation
PS Menu (Except for models without the Adobe PS3 Expansion Unit)
Version Displays the PostScript/PDF version.
CMYK Simulation You can select the CMYK ink color you want to simulate when reproducing
CMYK ink colors for an offset printer.
RGB Source When printing RGB data, you can select the RGB color definition you want
to simulate.
Rendering Intent You can select how to convert the color space when performing absolute
colorimetric, relative colorimetric, perceptual, saturation CMYK simulation,
and RGM simulation.
Black Point Compensation On, Off
Normally, select On. Select "Off" if you feel shadows are too light when
converting from a wide color space to a narrow color space.
Preserve Black On, Off
Set to On to print the K-axis area using black ink when printing CMYK
images.
Auto Rotate On, Off
Set to On to automatically rotate print data 90˚ to the right depending on
the paper width, data size, and other conditions.
PS Error Sheet On, Off
Set to On to print the contents of the error when a PostScript error occurs.
Optimize Edge Quality On, Off
Set to On to improve the image quality at the edges.
PDF Rendering Level Level 1 - 3
Normally, this is set to 3. Creates a PS that reproduces the PDF as closely as
possible, but may not be printable. If this occurs, try lowering the
rendering level.
PDF Overprint Simulation On, Off
Set to On to print the image using transparent colors when printing an
image with overprint settings.
Clear All Settings Restores the PS settings to their default settings.
SC-P8500DM/SC-P8500D/SC-P6500D/SC-P6500DE/SC-P6500E/SC-T7700DM/SC-T5700DM/SC-T7700D/SC-T5700D/SC-3700D/SC-T3700DE/SC-T3700E/SC-P8500DL/SC-T7700DL Series User's Guide
Menu List
153