Item Setting/Additional Explanation
Reduce Edge Blurriness On, Off
Set to On to reduce edge blurring in image outlines, text, and ruled lines.
Memory Device Interface Enable, Disable
Thick Paper On, Off
Bidirectional On, Off
Set to On to make the print head print while moving left and right. Set to
Off if ruled lines are misaligned due to print head misalignment.
Print Nozzle Check Pattern during Print Every Pages, Off
Prints a nozzle check pattern for any page. When this is set, a check pattern
for clogged nozzles is printed at the top of the page. See the following for
details on the nozzle check pattern.
U “Print Head Nozzle Check” on page 172
Store Held Job
(SC-P6500DE Series/SC-P6500E Series/
SC-T3700DE Series/SC-T3700E Series only)
On, Off
Displayed when storage has been set.
Use Production Stacker Enable, Disable
PC Connection via USB Enable, Disable
USB I/F Timeout Setting 20 to 600 seconds
Print while Scanning
(SC-P8500DM Series/SC-T7700DM Series/
SC-T5700DM Series only)
On, Off
You can scan while printing. However, you cannot scan when the optional
production stacker is installed.
SC-P8500DM/SC-P8500D/SC-P6500D/SC-P6500DE/SC-P6500E/SC-T7700DM/SC-T5700DM/SC-T7700D/SC-T5700D/SC-3700D/SC-T3700DE/SC-T3700E/SC-P8500DL/SC-T7700DL Series User's Guide
Menu List
154
To Next Page
Loading...
