Epson SureColor T2170 - Network Settings Menu; System Administration Settings Menu

131
Selecting the Paper Settings for Each Source - Control Panel
Printing CAD Drawings in HP-GL/2 or HP RTL Mode
Network Settings Menu
Select Settings > General Settings > Network Settings to configure your printer's network settings.
Setting Options Description
Wi-Fi Setup Router
Wi-Fi Direct
See the link below for more information
Wired LAN Setup — See the link below for more information
Network Status Wired LAN/Wi-Fi Status Displays current communication status and
connection settings
Wi-Fi Direct Status Displays the number of connected devices
and connection settings
Print Status Sheet Prints the current network connection
information
Connection Check — Confirms the network status. You can also
print a connection check report.
Advanced — Displays advanced information, such as
TCP/IP settings. You can enable or disable
other network settings.
Parent topic: Using the Control Panel Menus
System Administration Settings Menu
Select Settings > General Settings > System Administration Settings to configure security settings
and update firmware.