Code Message What to do
W-2404 Insufficient free space in the maintenance cartridge.
Delete all print jobs remaining in the operating system's print
queue.
Replace the maintenance cartridge (xxxx), and then perform
head cleaning or initial charge.
After deleting all of the print jobs,
replace the ma
intenance cartridge.
If a message is displayed, check the
details.
See “Replacing the Maintenance
Tank” on page 56
E-5101 The printer is disconnected.
Delete all print jobs remaining in the operating system's print
queue.
Check that the cable is connected, and then turn the printer back
on.
Contact service support if the error continues to occur.
After deleting all of the print jobs,
check that the cables are connected
correctly, and then restart the printer.
If the error persists, contact Epson
Product Support
E-2101 to E-2104 Parts have reached the end of their service life.
xxxxxx
Contact a technical representative.
Delete all print jobs remaining in the operating system's print
queue.
After deleting all of the print jobs,
contact Epson Product Support and
request replacement for the part
displayed in xxxxxx.
E-9901 (xxxx),
E-9902 (xxxx)
A printer system error occurred.
Delete all print jobs remaining in the operating system's print
queue.
Turn the printer off. Check if there is any paper remaining inside
the printer, and then turn the printer back on.
Contact service support if the error continues to occur.
Af
ter deleting all of the print jobs,
restart the printer.
If the error persists, a malfunction may
have occurred. Contact Epson Product
Support.
I-5201 Amount of data in print jobs sent to printer nearly at maximum
limit.
Stop sending the current print job and send the remaining
pages as another print job.
The print job is too large.
After deleting all of the print jobs, split
up the data, and then try printing
again.
W-2206 You have not installed genuine Epson ink cartridges.
xxxx
Information about ink levels may not be displayed, and use of
non-genuine ink is recorded for possible use in service support.
For optimum quality and reliability Epson recommends using
genuine Epson ink.
This printer is developed for use with
genuine ink cartridges. If you use
non-genuine cartridges, the print
result may be faint, or the ink
remaining may not be detected
normally. We recommend using
genuine Epson products.
W-2207 A non-genuine or refilled cartridge has been detected. Ink levels
may not be shown because of unknown ink volume.
W-2208 A non-genuine or refilled cartridge has been detected. Ink levels
may not be shown because of unknown ink volume.
Troubleshooting
81
To Next Page
Loading...
Need help?
General