Rev. A Adjustments and Settings 2-13
TM-J7000/TM-J7100 Developer’s Guide
Confidential
Connections for usable serial cross cables are as follows:
The type of cable that should be used depends on the operation and the handshake method for
the TM printer. You can operate the TM printer with the Windows driver, OPOS, or ESC/POS
commands. XON/XOFF, DTR/DSR, or RTS/CTS are available as handshake controls. See tables
in the following sections for the cable type for each connection.
Stand alone
Both TM printer and customer display (DM-D) are connected to the host PC via serial port.
Application
TM side control
control setting
XON/XOFF
(except OPOS)
DTR/DSR
(DOS, OPOS, Visual C)
RTS/CTS
(DOS, Windows driver, Visual C,
Visual Basic, MSComm)
XON/XOFF 1 Type A or B ——
2
1
To Next Page
Loading...
