Rev. A Specifications 4-3
TM-J7000/TM-J7100 Developer’s Guide
Confidential
.
Note:
All values listed above are the printing speed without character modification when the printing is
performed continuously for all columns without cleaning.
Printing speed may be slower, depending on the data transmission speed and the combination of control
commands. If the data transmission speed is slow, the printing becomes intermittent. Therefore, it is
recommended to use high-speed data transmission.
Print Speed
Print mode Font Unit Paper width (mm)
Slip
57.5
{2.26”}
69.5
{2.74”}
76
{2.99”}
82.5
{3.25”}
Normal Font A (6 lpi) lps 7.4 6.7 6.3 6.0 6.0
Font B (8 lpi) lps 10.7 9.5 8.9 8.6 8.6
Graphics mm/s 32 29 27 26 26
High-speed Font A (6 lpi) lps 11.6 10.5 10.1 9.7 9.6
Font B (8 lpi) lps 16.4 15.0 14.3 13.8 13.7
Graphics mm/s 50 45 43 41 40
Economy Font A (6 lpi) lps 11.6 10.5 10.1 9.7 9.6
Font B (8 lpi) lps 16.4 15.0 14.3 13.8 13.7
Graphics mm/s 50 45 43 41 40
To Next Page
Loading...
