44
Chapter 2 Setup
5
Select the printer to be paired, and then click [Connect].
6
If the window to enter a passkey appears, enter a passkey and click [OK].
7
Select the port to be used from the pull-down list, and then click [OK].
8
The “Connection complete” window appears. Click [Test Buzzer] or [Test Printing] to
check operation.
9
Click [Back to Main screen] to return to the main window.
10
Click the “x” button of TM Bluetooth® Connector to exit.
• If “Error” is displayed when you click the [Search] on the TM Bluetooth® Connector, check
whether:
*The Bluetooth adapter is installed to the computer.
* Bluetooth is ON in the Windows settings.
• If the device is not displayed on the TM Bluetooth
® Connector or the TM Bluetooth® Connector
Status shows “ ” after pairing.
Check whether:
* The printer is not turned on.
Turn on the printer.
* The printer is 10 m or further away from the computer.
* Confirm that there is no other wireless device, such as a microwave oven and cordless
telephone, that can interfere with the Bluetooth printer.
* If the printer and the computer are placed in different rooms separated by a wall, move the
printer and/or the computer in the same room.
* The printer may not be detected when the search time is short. Try search again with longer
search time.
* While a computer and printer are communicating, the printer cannot be detected by other
computers. Confirm that the printer to be detected is not communicating with any
computer.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
